Publications

1- Mahesh L, Vinyas M, Sudheer Reddy and Muralildhara B, “Investigation of the Microstructure and Wear Behaviour of Titanium Compounds Reinforced Aluminium Metal Matrix Composites”, 2018, Material Research Express, https://doi.org/10.1088/2053-1591/aaec4e

2- Vinyas M, Kattimani SC, “Finite element evaluation of free vibration characteristics of magneto-electro elastic plates in ygrothermal environment using higher order shear deformation theory”.Compos Struct2018;202:1339–52.

3- Vinyas M, “A higher-order free vibration analysis of carbon nanotube-reinforced magneto-electro-elastic plates using finite element methods”. Composite part B. 2019. 158. 286-301

4- Vinyas M. “Vibration control of skew magneto-electro-elastic plates using active constrained layer damping”. Composite Structures. 2019. 208. 600-617.

5- Vinyas M, Kattimani S C, Loja MAR, Vishwas M. “Effect of BaTiO3/CoFe2O4 micro-topological textures on the coupled static behaviour of magneto-electro-thermo-elastic beams in different thermal environment”. Mater.Res. Express5(2018)125702

6- Mrs. Smruthi Rekha Sen, presented a paper entitled “Study of Flow Behaviour in Vertical Centrifugal Casting”, at an International Conference on Advances in Materials and Manufacturing Applications, held at Amrita Vishwa Vidyapeetham from 16th – 18th August 2018.

7- Chethan K. S, Bharath Raman S., Anthony Rishabh Paul, Akash A., Rohith K, “Dual Internal Combustion Engine”, International Journal for Scientific Research and Development”, Volume 6, Issue 2, April 2018.

8- Ramesh Babu N, Ramesh M R, Kiran Aithal S Kotgi Kotresh “Effect of Lateral Vibrations during Directional solidification on Mechanical Properties of Al-18%wt Si Alloys” IMME17 Proceedings 5 (2018) 6954–6962 Elsevier Materials Today proceedings.

9- Vinyas M, Kattimani S C,”Finite Element Evaluation of Free Vibration Characteristics of Magneto-Electro-Elastic Rectangular plates in Hygrothermal environment using higher order Shear Deformation Theory”, Composite Structures, in Press, doi. 10.1016/j.compstruct.2018.06.069.

10- Shiv Pratap Singh Yadav, Nagesh Annarao Sutar, “STUDY OF BIOGAS BOTTLING PROCESS AND MODIFICATION WORK IN CASCADE”, International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 6, June 2018, pp. 202–209, Article ID: IJMET_09_06_024.

11- Shiv Pratap Singh Yadav, H N Redappa, “STUDY OF HIGH SPEED FLOW BEHAVIOR THROUGH AXIAL COMPRESSOR CASCADE BLADES”, International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 5, May 2018, pp. 371–382, Article ID: IJMET_09_05_041.

12- Mrs. Smruthi Rekha Sen, presented a paper entitled “Study of Flow Behaviour in Vertical Centrifugal Casting”, at an International Conference on Advances in Materials and Manufacturing Applications, held at Amrita Vishwa Vidyapeetham from 16th – 18th August 2018.

13- P.G. Mukunda,” Mechanical Characterization of Al and Al- 4%Cu alloy prepared by horizontal centrifugal casting process”. International Journal of Manufacturing Technology and Management, doi:10.4028/www.scientific. net/MSF.675-677.629

14- P.G. Mukunda, “Study of mechanical & tribological properties of Al-12% Si alloy using vertical centrifugal casting”. HCMCP-2016 Elsevier publication materials proceeding today.

15- P.G. Mukunda. “Strength Evaluation of Flake and Spheroidal Graphite cast irons Using Diametral Compression Test”, Journal of Materials Research and Technology, https://doi.org/10.1016/j.jmrt.2016.09.005.

16- Rudra Naik. M, “Effect of Lateral Vibrations during Directional solidification on Mechanical Properties of Al-18%wt Si Alloys”, ELSEVIER (MATERIALS TODAY) IMME17.

17- Avinash. L, “Mechanical Characterization of Al and Al- 4%Cu alloy prepared by horizontal centrifugal casting process”, International Journalof Manufacturing Technology and Management, doi:10.4028/www.scientific.net/MSF.675-677.629.

18- YESHASWINI SUDARSHAN D, “Transient Thermal Analysis During External Chilling of Al-18%Si castings Through Experimental and Ansys Finite Element Modelling”, ELSEVIER (MATERIALS TODAY) IMME17.

19- Suresh K.R, “Transient Thermal Analysis During External Chilling of Al-18%Si Castings Through Experimental and Ansys Finite Element Modelling”, ELSEVIER (MATERIALS TODAY) IMME17.

20- Manjunath H N, Kiran Aithal S, Harish Kumar L, Ramesh Babu N ,V. Auradi- "Transient Thermal Analysis During External Chilling Of Al-18%Si Castings Through Experimental And Finite Element Modelling" IMME 17, Elsvier, Materials Today Proceedings, March 10-12 2017, NIT, Trichy

21- Prajwal S, Manjunath HN, Sachin B, Krupa R, Kiran Aithal S,- A Study On Extraction Of Waste Heat From The Fins Of An Engine Cylinder To Generate Electricity", ERCAM 2017- International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engineering, (will be published in Springer Journal)

22- Sushanth H Gowda, Joel DMello, Manjunath H N, Dr Raju K- "A Study on the Performance and Emission Characteristics of CI Engines for Vateria Indica (VIOME) Based B10 Biodiesel under Different Compression Ratio", ERCAM 2017- International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engineering, (will be published in Springer Journal)

23- Ramesh Babu N, Ramesh M R, Kiran Aithal S, Kotgi Kotresh, Manjunath HN-" Development and Characterization of Al-Si functionally graded material through directional solidification", ERCAM 2017- International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engineering, (will be published in Springer Journal)

24- Suraj R, Harish N, "DESIGN OPTIMISATION AND LIFE ESTIMATION OF SPLIT HUB GEOMETRY OF FSAE CAR", Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016, November 11-17, 2016, Phoenix, Arizona, USA 2016.

25- Kiran .V.S , Manjunath.H.N, Madhusudhan:"A study on optimization of low pressure feed water heater for thermal Power plant"- International Journal of Advance Research in Science and Engineering -ISSN: 2319-8354, Volume 05, Issue 07 and July 2016

26- Rakesh R, Manjunath.H.N,Madhusudhan:"Study of Vapour Compression Refrigeration System using Double Pipe Heat Exchanger"- International Journal of Advance Research in Science and Engineering -ISSN: 2319-8355, Volume 05, Issue 07 and July 2016

27- Sajjan Raj Keshari, Sandeep G, "The effect of SiCp reinforcement on the Microstructural Mechanical Properties and Tribological Behavior of A-356 Alloy", paper presented at 5th National Conference on Emerging Trends in Engineering Technologies – ETET 2016, held on 11th and 12th March 2016 at Jyothi Institute of Technology, Bangalore.

28- Vijaymanthesh M, Krupa R, Manjunath HN-"Extraction and study of biodiesel and valve addition of biomass palletization"- International Conference on Advanced Materials,Manufacturing,Management and Thermal Sciences [AMMMT – 2016], Siddaganga Institute of Technology, Tumkur

29- Girisha N, Manikumar K C, Manjunath H N, Sushanth H. Gowda,N.Kapilan "A Study on Effect of Alternative Refrigerant on the Performance of a Domestic Refrigerator"- Journal of Mechanical Engineering and Automation, Scientific & Academic Publishing, pp. 138-141, DOI: 10.5923/c.jmea.201601.26., p-ISSN: 2163-2405, e-ISSN: 2163-2413

30- Manjunath HN. Suhas Kumar S, Sushanth Gowda H, Kiran Aithal S- "Design and Development of Solar-Thermal Energy storage system of phase change materials"- Journal of Energy and Power, Scientific & Academic Publishing, USA (under communication- Conference will be held in the month of august)

1, Manjunath Gowda M, Manjunath HN., Dr.N.Kapilan: Performance Testing of Solar based Evaporative Cooling System- Thirty-first National Convention of Mechanical Engineers and National Seminar on " Renewable Energy Sources: A Panacea For India's Growing Energy Needs organised by Institute of Engineers (India) under aegis of Mechanical Engineering Division Board, IEI, The ATRIA hotel, Bangalore, 04-05 September 2015


FACULTY NAME : Dr. P G Mukunda

DESIGNATION : PROFESSOR


FACULTY NAME : Dr. SEKHAR MAJUMDAR

DESIGNATION : PROFESSOR

Papers Published by Prof. S. Majumdar in Journals and Conference Proceedings (2010-2013)


FACULTY NAME : Dr. P. BALACHANDRA SHETTY

DESIGNATION : PROFESSOR

International Journals:


FACULTY NAME : Dr. DESAI GOWDA H S

DESIGNATION : PROFESSOR


FACULTY NAME : Dr. KIRAN AITHAL

DESIGNATION : PROFESSOR

Papers Published:


FACULTY NAME : DR.VIJAYKUMAR RAMANATH. KABADI

DESIGNATION : PROFESSOR

International Journals:


FACULTY NAME : Dr. MADHUSUDHAN

DESIGNATION : PROFESSOR

International Journal:


FACULTY NAME : Mr ARUN KUMAR GL

DESIGNATION : ASST.PROFESSOR


FACULTY NAME : Mr. CHETHAN KS

DESIGNATION : ASST.PROFESSOR


FACULTY NAME : Mr. HARISH N

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:


FACULTY NAME : Mr. MANJUNATH HN

DESIGNATION : ASST.PROFESSOR


FACULTY NAME : Mr NUTHAN PRASAD B S

DESIGNATION : ASST.PROFESSOR


FACULTY NAME : Mr PRAVEEN B A

DESIGNATION : ASST.PROFESSOR


FACULTY NAME : Mr. PRAVEEN KUMAR S

DESIGNATION : ASST.PROFESSOR


FACULTY NAME : Mr. RAVI PRAKASH

DESIGNATION : ASST.PROFESSOR


FACULTY NAME: Mrs. SMRUTIREKHA SEN

DESIGNATION: ASST.PROFESSOR


FACULTY NAME : Mr. RAMESH BABU N

DESIGNATION : ASST.PROFESSOR

  • Dr Jharna Majumdar1, Ramesh Babu N2, Sunil Kumar H S2, Manjunath H N2, R Praveen Kumar Jain3, Venkatesh G M3, Srikanth A3, Gurinder Singh Gill3- Vision Based Interactive Robotic Exhibits for Museums,- First IEEE International Symposium on Cost-Effective Museum Exhibits in Engineering and Applied Science 30th Dec-2nd Nov 2012

FACULTY NAME : Mr. RUDRA NAIK M

DESIGNATION : ASST.PROFESSOR

  • N. Kusuma, RudraNaik. M, S. M. Murigendrappa,P.V. Shashi Kumar "Interfacing Of Mems Accelerometer With PLC For Real-Time Health/Condition Monitoring Of CNC Machin
  • Babu K N, MallikarjunaBiradar,Dr. N G S Udupa,RudraNaikM,Santhosh N "Characteristic Evaluation of Wear Properties of NiTiAl Based Shape Memory Alloys for different Composition" IJAIR-2014
  • "Development &Characterzition Of High Performnce Reinforce Carbon Fibre & Glass Fibre Composites".IJAIR-2013
  • "Thermal Simulation of FCBGA Package with Heat Sink", presented at comsol multi physics Conference, Nov 13-14, 2014.

FACULTY NAME : Mr. SRIRAM MUKUNDA

DESIGNATION : ASST.PROFESSOR

  • Sriram Mukunda, Narendra Nath. S, P.G. Mukunda, "Effect of Copper content and low temperature aging on Nitinol", Indian Foundry Journal, Vol. 57, No. 8, pp. 23-27, August 2011.
  • SriramMukunda, NarendraNath S, "Effect of Copper content on the wear properties of Nitinol", presented at International Conference on Advanced Materials at BTL Institute of Technology, Bangalore on August 20th 2011.
  • SriramMukunda, DelliBabu, NarendraNath S, Mervin A. Herbert,"Effect of heat-treatment and alloying on properties of NiTiCu", presented at an International Conference RAMPT-2013 held at National Engineering College, Kovilpatti, TAmil Nadu on January 7th-9th 2013.
  • Sriram Mukunda, NarendraNath S, Mervin A. Herbert, P. G. Mukunda,"Effect of heat-treatment and alloying on mechanical properties of NITINOL", presented at a National Conference Trends in Mechanical Engineering (TIME-2014) held at NMIT Bangalore on January 16th-17th 2014.
  • SriramMukunda, NarendraNath S, Mervin A. Herbert, P. G. Mukunda,"Effect of low temperature annealing on the tribological properties of Ni-Ti shape memory alloys", presented at a National Conference on Innovative Research on Materials, held at Christ University, Bangalore on November 16th-17th 2014.
  • Sriram Mukunda, Narendra Nath S, Mervin A. Herbert, P. G. Mukunda, "Effect of low temperature annealing on the wear properties of NITINOL", presented at International Conference at University of Malaysia Pahang held on November 11th – 13th 2015, published in Institute Of Physics Conf. Series: Materials Science and Engineering 114 (2016) 012119 doi:10.1088/1757-899X/114/1/012119.

FACULTY NAME : Mr. SUNIL KUMAR

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • 1. Dr Jharna Majumdar1, Ramesh Babu N2, Sunil Kumar H S2, Manjunath H N2, R Praveen Kumar Jain3, Venkatesh G M3, Srikanth A3, Gurinder Singh Gill3- Vision Based Interactive Robotic Exhibits for Museums,-First IEEE International Symposium on Cost-Effective Museum Exhibits in Engineering and Applied Science 30th Dec-2nd Nov 2012Control and Navigation of Differential Drive Mobile Robot, Dr Jharna Majumdar, Sunil Kumar H S, Prashanth N, Sandeep Malu, Recent Trends in Robotics, 2013

FACULTY NAME : Mrs. HAMRITHA

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • Hamritha S, Desai Gowda H S ., "Study of mechanical properties of Faded spheroidal graphite iron
  • International Conference on emerging trends in manufacturing engines and Modelling", IJAER publications PP10283-10286,2015.
  • Hamritha S, N G S Udupa, Desai Gowda H S, Mervin A Herbert, "Effects of fading in spheroidal graphite iron used in cylinder liners" ETET -2013, JYOTHY INSTITUTE OF TECHNOLOGY-Bangalore
  • Harish N, Hamritha S, Kiran Aithal S, " Characterization of Al-17wt%Si using centrifugal casting " International Conference in Material processing technology Trans Tech Publications, Applied mechanics and material 766-767

FACULTY NAME : Ms KRUPA R

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • . Krupa R, Sheetal N Singh, " To produce Bio Diesel from milk dairy wash water scum-study of its properties, performance and emission characteristics as a blended fuel on IC engine/ KSBDB National compendium-article 7, 2012-13
  • Krupa R, ,SachinNaraian , Shivayogi, RovinsRoshan"Production Of Ethanol From Fruit Waste And Blending It With Rice Bran Oil as an alternate fuel for diesel engines – TIME 2014, NMIT.

FACULTY NAME : Mr. SURESH KR

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • Suresh K.R, Mahendran S, M.S.Krupashankara, Avinash L., " Influence of Powder Composition & Morphology on Green Density for Powder Metallurgy Processes", International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 1, January 2015
  • Sanjay K N,Dr. Aprameyan S , Suresh K R , Santhosh A N "Sliding wear of RRA Treated High Strength Aluminum Alloy " International Research Journal of Engineering and Technology", Vol 2,Issue 3, June (2015) pp 1957-1960. / https://www.irjet.net/archives/V2/i2/Irjet-v2i3315.pdf

FACULTY NAME : MR. PAVAN K N

DESIGNATION : ASST.PROFESSOR

  • Pavan.K.N , Dr.SekharMajumdar ,Shiv Pratap Singh Yadav , " CFD Analysis of Turbulent Incompressible Flow in Y Shaped Air-Intake Ducts", Proceedings National Conference,-TIME 2014, NMIT

FACULTY NAME : MR. SACHIN B

DESIGNATION : ASST.PROFESSOR

  • Studies on Laser Dressed Super Abrasive Grinding Wheels", International Conferenceon Convergence of Science, Engineering and Management in Education and Research,DayanandaSagar College of Engineering, Bangalore, 27th September 2013.
  • "A Study on Wire Breakage in Wire EDM", Emerging Trends in Engineering andTechnology, Jyothy Institute of Technology, Bangalore, 9th March 2012."A Study on Surface Engineering-Laser Cladding", National Welding Seminar, KTPO,Bangalore, 9th February 2013.
  • "Optimization and Prediction of Laser Dressed Super Abrasive Grinding Wheels",National Level Technical Symposium Pratibimb, The National Institute of Engineering,Mysore, 31st October 2013.
  • "Optimization of cutting conditions on surface finish in diamond turning process",National Level Technical Symposium Pratibimb, The National Institute of Engineering,Mysore, 31st October 2013.
  • "A Study on Recent Trends: Additive Manufacturing", National Conference onAdvances in Mechanical Engineering, K S School of Engineering and Management,Bangalore, 12th November 2013.
  • "A Review on Laser Cladding Process", National Conference on Trends in MechanicalEngineering, NitteMeenakshi Institute of Technology, Bangalore, 17th January 2014.

FACULTY NAME : Mr. AVINASH L

DESIGNATION : ASST.PROFESSOR

  • "The effect of ceramic reinforcement on the Microstructure, Mechanical properties and Dry sliding wear behavior of hypo-eutectic Al-Si-Mg alloy" International Journal of Innovative Research in Science, Engineering and Technology ISSN 2319-8753 Volume 2, issue 3, march (2013).
  • "The Effect of Heat Treatment on the Microstructure, Mechanical properties and Dry Sliding Wear Behaviour of A356.0 Reinforced with Alumina" International Journal of, Innovative Research in Science , Engineering and Technology ISSN 2319-8753 Volume 2, issue 4 April (2013)
  • "Influence of Powder Composition & Morphology on Green Density for Powder Metallurgy Processes "International Journal of Innovative Research in Science, Engineering and Technology, ISSN 2319-8753 Volume 4, January (2015)

FACULTY NAME : Mr. SANDEEP GM

ESIGNATION : ASST.PROFESSOR

  • Dr. Shantharaja M., Mr. Sandeep G. M.," Experimental And Numerical Analysis Of Propagation Of Stress Wave In Sheet Metal",INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 3, ISSUE 10, OCTOBER 2014 ISSN 2277-8616,
  • B.S. Surendra, G.M. Sandeep and P. Balachandra Shetty "Design and Fabrication of Inverted Cup Single Action Press Draw Tool." International Journal of Latest Technology in Engineering, Volume IV Issue VI is june, 2015, pp 15-17, impact factor 2.115, www.ijltemas.in

FACULTY NAME : Mr. PRASHANTH N

DESIGNATION : ASST.PROFESSOR

  • Mr. Pavan Kumar AV ,Mr. Mohan G , MrBrijesh N, Mr. Chethan V, Mr. Prashanth N, "IC Engine Powered Forward and Reverse Transmission for All Terrain Robot", International Conference on Computer Science and Mechanical Engineering (ICCSME), 22nd March 2015 Pune. IR-CSMEPUNE-22035-320.
  • Dr. Jharna Majumdar, Sunil Kumar H S, Prashanth N, R Praveen Kumar Jain, Sandeep Kumar Malu, "Design & Development of Fixed Serial Manipulators & Autonomous Mobile Robots" National Conference on Recent Trends in Engineering (May-2013), SVCE, India.
  • Prashanth.N, Subbaya.K.M, Rajendra.N, Varadarajan.Y.S,"ANN Prediction & Taguchi Approach for Three Body Abrasive Wear Behavior of Carbon Fiber Reinforced Epoxy Composite", International Conference on Emerging Trends in Engineering (ICETE-2011). - Nitte,Mangalore,Karnataka,INDIA : NMAMIT, 4-5th May 2011. ISBN: 978-93-81195-07-9
  • Prashanth.N, Subbaya.K.M, Rajendra.N, Varadarajan.Y.S "Solid Particle Erosion Wear Behaviour of Carbon Fiber Reinforced Epoxy Composite Using Taguchi Approach", 5th national Conference on Plastic & Rubber Technology (POLYCON-2011). - Mysore,Karnataka,INDIA, 25-26th April 2011.
  • Prashanth.N, Subbaya.K.M, Rajendra.N, Varadarajan.Y.S, "Taguchi Method and ANOVA Approach for Investigation on Three-body Abrasive Wear Behaviour of Carbon Fabric Reinforced Epoxy Composite with and without Graphite Filler", International Conference on Operational Excellence And Global Competitiveness (ICOEGC-2011). - Bangalore,Karnataka,INDIA : RVCE & ABCON Information System, 3-5th February 2011.