Workshop & Training

Workshops Conducted

Dept. of Mechanical Engg organized a One-day Natural Workshop on Six Sigma Yellow Belt
Resource Person: MSME and Dept. of Mechanical Engineering
02/04/2019
Dept. of Mechanical Engg organized a One-week Faculty Empowerment Program on “Teaching, Learning and assessment with Models”
Resource Person: Coimbatore Institute of Technology, Tamil Nadu
16/03/2019 to 22/03/2019
Dept of Mechanical Engg. Organized a one-day workshop on” Design Thinking”
Resource Person: Isetilab & Infopace
07/02/2019
Dept of Mechanical Engg. Organized a 5-day workshop on “FORMULA-BHARATH 2019” at Kori Motor Speedway
Resource Person: Engineering Mobility Consortium
23/01/2019 to 27/01/2019
Dept of Mechanical Engg organized a 3-day workshop on “Entrepreneurship Awareness Camp on SCIENTISTS OF UTOPIA” at TECHNIX18IIT(BHU).
Resource Person: NSTEDB, GOI, Varanasi
16/01/2019 to 18/01/2019
Dept. of Mechanical Engg organized a one-day workshop on “Advanced Ceramics”.
Resource Person: Dr. Shyam Rao, Senior Vice-President, Carborundum Ceramics Ltd
05/01/2019
Dept of Mechanical Engg. Organized a 5-day workshop on” Product Design Engineering using FUSION 360”.
Resource Person: Mr. Prashanth, Chennai
03/01/2019 to 07/01/2019
Dept of Mechanical Engg organized a Technical Talk on “Aerospace Casting”.
Resource Person: Dr T Ram Prabhu, Scientist, Defence R&D Organization
05/02/2019
Dept of Mechanical Engg organized a Technical Talk on “Product Management”.
Resource Person: Shri Jeevan Satish Kumar, Technical Programme Manager, WIDIA Products Group
10/01/2019
Dept of Mechanical Engg organized a Technical Talk on “Advanced Ceramics”.
Resource Person: Dr. Shyam Rao, Sr. Vice President, Carborundum Ceramics LTD
05/01/2019
Dept of Mechanical Engg organized a Technical Talk on “Technical Talk on "What is Industry and how its departments are framed to meet the target”.
Resource Person: Mr K M Sharma, Senior DGM, L&T
08/09/2018
Dept. of Mechanical Engg organized a Technical Talk on “Introduction to Cold storage” in association with ISHRAE Bangalore Chapter.
Resource Person: Mr Anish Simha, M/s Rinac India ltd
07/09/2018
Dept. of Mechanical Engg organized a Technical talk on “Refrigeration and Air Conditioning in association with ISHRAE Bangalore Chapter”.
Resource Person: Dr A Madhukar, CEO, Ms Climatics & Mr Anish Simha, M/s Rinac India ltd
06/09/2018
Department of Mechanical Engineering organized a Technical Talk on ””, on 31st October 2018.
Chief Guest: Mr. Chandrappa, Deputy Manager, IMTMA.
31st October 2018
YANTRA MECHANICAL was inaugurated on 5th September 2018, where a Technical Talk was delivered by Mr. Gurvinder J Singh on “Recent Developments in Mechanical Engineering”. 5th September 2018
A technical talk on “GREEN ENERGY”, was delivered to the students of Mechanical Engineering by Credible Future Pvt Ltd, New Delhi 24th Aug 2018
Delegates from Credible Future Pvt Ltd, visited NMIT campus on 23/08/2018, for collaboration in establishing Automotive Research Centre for hosting National E-Kart championship. 23 Aug 2018
Inauguration of newly set-up Centre of Excellence – Aero & IoT of NMIT was done by Dr. Harshvardhan, Honourable Union Minister of Science and Technology & Easter Sciences, Govt. of India on 13/08/2018. The Guest of honour was Dr. Sadananda Gowda, honourable union minister for statistics and program implementation, Govt. of India. 13 Aug 2018
YANTRA MECHANICAL was inaugurated on 5th September 2018, where a Technical Talk was delivered by Mr. Gurvinder J Singh on “Recent Developments in Mechanical Engineering”. 5th Aug 2018
The delegates of TOYOTA KIRLOSKAR MOTOR PVT LTD, visited NMIT Bangalore on 03/08/2018 as a part of the company CSR activity to establish Toyota Engine and Transmission Excellence Centre for enhancing the academic skill of Mechanical and Automobile experts to the students to meet the cultural and industrial requirement. 3rd Aug 2018
Mr. Anand Bhatia, Managing Director-Bird Electronics interacting with 3rd semester and 5th semester students about projects and internships.  
Workshop on “Introduction to FEM through ANSYS” in association with Glisten Project Solutions Pvt Ltd. - 27th& 29th July, 2018. 27th & 29th July, 2018
Delegates from the “Imperial Society of Innovative Engineers” visited NMIT campus on 26/07/2018, for the discussion regarding collaboration for academic partnership, still development program. 26th July 2018
Dr. Seetharamu, Dr B K Muralildhara and Mr. Harish Kumar L from Mechanical Engg Dept. represented NMIT on 14/07/2018 at the meeting on “Technology and training aspect”, organized by National Design and Research Forum and Institution of Engineers, at IEI, Queens’s road Bangalore. 14th July 2018
Skill Development Program on “Essentials of CATIA V5: Part Modeling” - 09th to 13th July, 2018. 9th July to 13th July 2018
Dept. of Mechanical Engineering organized a 3-day National workshop on “Smart Materials & Structures”, with hands-on COMSOL with Physics. 26/6/2018 to 28/6/2018
IQAC and Dept. of Mechanical Engineering organized a 3-day FDP on “Technology Enhanced Teaching & Learning” 25th, 26th and 28th May 2018
Mr. Sridhar, General Manager - Application & Engineering, Federal-Mogul Powertrain, delivered a talk on Advances in Automotive Industries for 4th Semester students of ‘A’ and ‘B’ section on 23-02-18. 23 Feb 2018

The Department of Mechanical Engineering organized a One Day Workshop on " Industry 4.0 - IIOT "(Expert Lecture Series- I ) in association with Indian Institute of Plant Engg (IIPE) and Indian Association of Energy Management Professionals (IAEMP) on 09th February 2018 at Old Seminar Hall NMIT.
Workshop Co-ordinator : Mr. Harish Kumar L, Assistant Professor , Dept of ME
The workshop agenda is as follows:

TIME AGENDA FOR THE SESSIONS
08.45 A.M – 10.15 A.M Registration And Inauguration
10.15 A.M - 11.30 A.M SESSION I Overview of IIoT, Industry-4.0 Evaluation, Capacity Utilization, Maintenance Management through IIoT.
Resource Person : Shri Somasundaram
11.30 - 11.45 A.M Tea Break
11.45 A.M- 1.00 P.M SESSION II Energy Management through IIoT
Resource Person : Shri Mallikarjuna
1.00 P.M – 2.00 P.M Lunch Break
2.00 P.M – 3.15 P.M SESSION III Infrastructure and Methodology for IIoT
Resource Person : Shri Vikram Padaki
3.15 PM - 3.30 P.M Tea Break
3.30 P.M –4.00 P.M SESSION IV R&D in IIoT and Panel Discussion
Resource Person : Shri Ganesh
4.00 P.M – 4.30 P.M Valedictory Function

The workshop had participants from various Industries like Robert Bosch, BEL and from colleges across Karnataka. The topics mentioned in the agenda were covered by the experts belonging to reputed industries in India. The Workshop saw the Energy Meter installation at the NMIT campus for analyzing the Power utilization across different buildings of NMIT. The highlight of the workshop was the Panel discussion, where all the experts were asked to discuss on the Energy management through IIOT and its effectiveness in the future towards the betterment of our nation.

09 Feb 2018
Department of Mechanical Engineering and Centre of nanomaterials and MEMS
organized a 3-day FACULTY DEVELOPMENT PROGRAM on “Microsystems” from
05/02/218 to 07/02/2018 in CDEPS Lab.

    

Feb 2018
Two students and faculty Mr. Harish Kumar L participated in SAE SUPRA Technical workshop on 6 th January 2018 at SRM Institute of Science & Technology, Chennai. 06 January2018
Dr. T Ram Prabhu, Scientist, DRDO, delivered a talk on Advances in Materials Science for 5th Semester students of ‘A’ and ‘B’ section on 11-11-17. 11 Nov 2017
The Innovative and Entrepreneurship Development Centre ( IEDC) organised a one day workshop on " Open Learning Program in Entrepreneurship and Business Management " on Friday 22nd September 2017 at New Seminar Hall, NMIT(10am to 1pm ). The Chief Guest was Prof. N.R.Shetty (Hon’ble Chancellor, Central University of Karnataka, Kalburgi & Advisor, NMIT). An MOU was signed between NMIT and Entrepreneurship Development Institute of India (EDII), Ahmedabad,Gujarat to establish Project Guidance Centre for OLPE programs and to promote Entrepreneurial activities in our campus. 22 September 2017
The Department of Mechanical Engineering in association with YANTRA organised a Technical Talk on " Lean Product Development System" on Friday 22nd September 2017 at New Seminar Hall, NMIT(2pm to 4pm) that was delivered by Mr. H.S.Hande - General Manager L&T Construction Equipment Ltd. 22 September 2017
Workshop on 'Awareness On Intellectual Property Rights'
The Department of Mechanical Engineering, Patent Cell NMIT&Innovative and Entrepreneurship Development Centre (IEDC) in association with E-Cell NMIT (Dhaarana) organized a One Day workshop on "Awareness on Intellectual Property Rights" on 22/08/2017
22 August 2017
The Department of Mechanical Engineering had organized a Two Day AICTE approved FDP under the aegis of Pandit Madan Mohan Malaviya National Mission for Teachers and Teaching (PMMMNMTT) "FOUNDATION PROGRAM IN ICT FOR EDUCATION" Conducted by IIT Bombay , supported by National Mission on Education through ICT (NMEICT)- MHRD, Govt. of India on 19th and 20th August 2017. 19 & 20 August 2017
Workshop on 'Awareness On Intellectual Property Rights'
The Department of Mechanical Engineering, Patent Cell NMIT&Innovative and Entrepreneurship Development Centre (IEDC) in association with E-Cell NMIT (Dhaarana) organized a One Day workshop on "Awareness on Intellectual Property Rights"on 22/08/2017
8 August 2017
Department of Mechanical Engineering conducted a One-Day workshop on "Current Technologies in Solar Energy", in association with YANTRA, on Tuesday, 25/04/2017 at Old Seminar Hall. April 2017
Department of Mechanical Engineering organized a National Level Training Program through ICT (Webinar) - Five day FDP on "Research Methodology" 9th - 13th Jan, 2017 ​under TEQIP-II, supported by NITTR Chandigarh.

    

January 2017
A Three Day National Workshop on “REALISTIC APPROACH TO WEAR MEASUREMENTS AND MECHANISMS (RATWMAM 2016)” was organized by Department of Mechanical Engineering in association with Ducom Instrument Pvt.Ltd, Bangalore at Nitte Meenakshi Institute of Technology, Bangalore supported by Technical Education Quality Improvement Program-II. Eminent speakers from IISc, NIT Warangal, Kennametal, CMTI, NAL and UVCE delivered the Technical Talk. September 2016
Prof  Majumdar delivered a talk at the NAFEMS International Conference to be held at Bangalore (NIMHANS Convention Centre) on August 29-31, 2016.  The subject of the talk was “MODELING AND SIMULATION OF TRANSITIONAL AND TURBULENT FLOWS IN COMPLEX CONFIGURATION”. August 2016

Workshop on Pedagogy-II conducted from 01/08/2016 - 06/08/2016 at new seminar hall by National Institute of Technical Training and Research (NITTR), chennai under TEQIP - II.

August 2016
Mr. Tetineni S. Rao, Head, Foundry Operations India Representative from Armstrong Industries delivered a technical talk on "Latest developments in Foundry Technology and Sustainability" April 2016
T​raining on "ENTREPRENEURSHIP DEVELOPMENT", was conducted​(at NMIT​) with sponsorship​ by RAJIV GANDHI NATIONAL INSTITUTE of youth development. March 2016

Colloquium on "Quality Management System - An Innovation" by Mr. Ravindranath, Department of Mechanical Engineering, NMIT Bangalore.

February 2016

Guest Lecture on "Product Development and IPR" by Prof. Achutha Rao, Former Technical Director, National Institute of Design Bangalore.

February 2016

3-day Student Training Program on “GD and T – Y14.5 ASME 2009 standards” was co-ordinated by Mr. Vinayaka. N.

February 2016

Lecture on “Creativity, Design, Invent & Innovation” by Dr S. Ghoshal

February 2016

Workshop on “Pedagogy”

January 2016

1-day National Workshop on “Cutting edge technologies for Automobile Emission Control and Management”

November 2015

Two-week ISTE STTP on “Technical Communication”

November-December 2015

Lecture on “Gas Turbine Enabling Technologies”

September 2015

3-day workshop on “Research Methodology”, under TEQIP-II

August 2015

Mechanical Project House held at NMIT Bangalore

April 2015

Anveshna-state level students project exhibition

February 2015

1-day workshop on “TIG Welding” for non-teaching staff, under TEQIP-II

February 2015

1-day workshop on “TIG Welding” for non-teaching staff, under TEQIP-II

January 2015

2-day workshop on “Advanced joining process for Automotive Sector”, under TEQIP-II

January 2015

Listed below are workshop conducted earlier

Workshop on ‘TIG Welding’ for Non-teaching staff under TEQIP January 2015
Workshop on “Advanced Joining Process for Automotive Sector” January .2015
Workshop “On Control Systems” organized by IIT Kharagpur and NMIT as Remote Centre . December 2014
Workshop on “Intellectual Property rights and Patenting” Jointly organized by KSCST &NMIT October 2014.
Workshop on “Welding Technology” under TEQIP-II. June 2014
Workshop on “Rapid Prototyping and Manufacturing Technologies” under TEQIP-II in association with Additive Manufacturing Society of India (AMSI) June 2014.
Workshop on “Research on renewable energy resources through ‘Matlab/Simulink models’ February 2014
National Conference on “Trends In Mechanical Engineering “ (TIME-2014) under TEQIP January 2014.

Conferences / Workshops / Tech Talks Organized @NMIT

1, Department of Mechanical Engineering in Association with YANTRA organized "YANTRA Inauguration" for the Academic Year 2017-18 and a Technical Talk on "Prerequisites to Enhance Employability" on 19th August 2017.
The Technical Talk was delivered by Mr. D. Keshava Kumar, Chief Executive of L&T Construction Equipment Ltd.

2, One Week Faculty training program on "PEDAGOGY" in association with NITTTR, Chennai (Extension centre) Bangalore, Aug 2016

3, Three Workshop on " RESEARCH METHODOLOGY" for final year students at PGDM, NMIT, Aug 2015

4, Two Day National Workshop on CUTTING EDGE TECHNOLOGIES FOR AUTOMOBILE EMISSION CONTROL AND MANAGEMENT, Nov 2015 in association with R.T.O.Yelahanka, Transport Department, Government of Karnataka under TEQIP-II

5, National conference on TRENDS IN MECHANICAL ENGINEERING(TIME) Jan 2014, under TEQIP-II

6, National Conference on Recent Trends in Alternative Energy- "BIOFUELS, SOLAR, ELECTRIC & AIR" IN REDUCING POLLUTION OF MOTOR VEHICLES: November 2013 in association with R.T.O.Yeshawanthapura, Transport Department, Government of Karnataka under TEQIP-II